Quantity |
Unit Price (USD) |
1-99 |
0.75 |
100-499 |
0.63 |
500-999 |
0.48 |
1000-1999 |
0.4 |
2000-4999 |
0.36 |
5000+ |
Sample Price (90% off of first 5 MCUs)
The NuMicro® MS51EB0AE is an 1T 8051-based CMOS microcontroller, running at speeds up to 24 MHz. It features 16 KB of flash memory, 2 KB of SRAM, and 4 KB of loader ROM for in-system programming (ISP). This microcontroller is equipped with a wide range of peripherals, including 2 sets of UART, 1 set of I²C, 1 set of SPI, 26 GPIO pins, 15-channel 12-bit ADC, a watchdog timer, and 12-channel 16-bit PWM. The package is available in TSSOP28.
Target Application:
Key Features:
• | Operating Characteristics | ||
- | Voltage range: 2.4V to 5.5V | ||
- | Temperature range: - 40 ℃ to + 105 ℃ | ||
- | EFT 4 kV | ||
- | ESD HBM 8 kV | ||
• | Core | ||
- | 1T 8051-based CMOS microcontroller running up to 24 MHz | ||
• | Memories | ||
- | 16 K Bytes Flash Memory | ||
- | Configurable 4 K / 3 K / 2 K / 1 K Bytes of LDROM, which provides flexibility to user developed Boot Code | ||
- | 2 K bytes SRAM | ||
- | 256 Bytes on-chip RAM | ||
- | Flash Memory accumulated with pages of 128 Bytes each | ||
- | Built-in In-Application-Programmable ( IAP ) | ||
• | Clocks | ||
- | External clock input ( 32 K body only ) | ||
- | 16 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions. | ||
- | 24 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions | ||
- | 10 kHz low-speed internal oscillator | ||
- | On-the-fly clock source switch via software | ||
• | Power management | ||
- | Brown-out detection ( BOD ) with low power mode available, 4-level selection, interrupt or reset options | ||
- | Power-on reset ( POR ) | ||
• | Peripherals | ||
- | Two 16-bit Timers / Counters 0 and 1 compatible with standard 8051 | ||
- | One 16-bit Timer 2 with three-channel input capture module and 9 input pin can be selected | ||
- | One 16-bit auto-reload Timer 3, which can be the baud rate clock source of UARTs | ||
- | One 16-bit PWM counter interrupt for timer | ||
- | 12-channel 16-bit pulse width modulator (PWM) output, with different modes and Fault Brake function for motor control | ||
- | One programmable Watchdog Timer ( WDT ) | ||
- | One dedicated Self Wake-up Timer ( WKT ) | ||
- | 2 sets of full-duplex UART ports with frame error detection and automatic address recognition | ||
- | 1 set of SPI port with master and slave modes, up to 12 Mbps when system clock is 24 MHz | ||
- | 1 set of I²C bus with master and slave modes, up to 400 kbps data rate | ||
- | 15 channels of 12-bit ADC, up to 500 ksps converting rate | ||
- | 26 general purpose I/O pins and 1 input-only pin | ||
- | Programmable pull-ups pull-lows | ||
• | Development Tools | ||
- | Nuvoton Nu-Link with KEILTM and IAR development environment | ||
- | Nuvoton Nu-Link In-Circuit-Programmer | ||
- | Nuvoton In-System-Programming ( ISP ) | ||
• | 96-bit Unique ID ( UID ) | ||
• | 128-bit Unique Customer ID ( UCID ) | ||
• | 2-Byte ( 16-bit ) PDID | ||
• | Package | ||
- | TSSOP28 |
For more details And documents, please link To Nuvoton Official Website GO
Quantity | Discount | You Save |
---|---|---|
100 | 16% | Up to$12.00 |
500 | 36% | Up to$135.00 |
1000 | 46.67% | Up to$350.03 |
2000 | 52% | Up to$780.00 |
Part No. | MS51EB0AE |
Flash (Kbytes) | 16 |
SRAM (Kbytes) | 2 |
SRAM | 32 |
Operating Voltage (V) | 2.4 to 5.5 |
Package | TSSOP28 |
Operating Temp. Range | -40 to +105 |