8bit 8051 MCUs

View larger

Send to a friend

Send to a friend

MS51EB0AE

Quantity

Unit Price (USD)

1-99

0.75

100-499

0.63

500-999

0.48

1000-1999

0.4

2000-4999

0.36

5000+

Contact

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

MS51EB0AE

Quantity	Unit Price (USD)
1-99	0.75
100-499	0.63
500-999	0.48
1000-1999	0.4
2000-4999	0.36
5000+	Contact

More details

Reference MS51EB0AE

Condition New

Quantity 74 Item Items

Quantity :

MS51EB0AE

The NuMicro® MS51EB0AE is an 1T 8051-based CMOS microcontroller, running at speeds up to 24 MHz. It features 16 KB of flash memory, 2 KB of SRAM, and 4 KB of loader ROM for in-system programming (ISP). This microcontroller is equipped with a wide range of peripherals, including 2 sets of UART, 1 set of I²C, 1 set of SPI, 26 GPIO pins, 15-channel 12-bit ADC, a watchdog timer, and 12-channel 16-bit PWM. The package is available in TSSOP28.

Target Application:

LED lighting
Home appliances
Industrial control
Stepper motor
Battery management system
Power supplies

Key Features:

•	Operating Characteristics
	-	Voltage range: 2.4V to 5.5V
	-	Temperature range: - 40 ℃ to + 105 ℃
	-	EFT 4 kV
	-	ESD HBM 8 kV

•	Core
	-	1T 8051-based CMOS microcontroller running up to 24 MHz

•	Memories
	-	16 K Bytes Flash Memory
	-	Configurable 4 K / 3 K / 2 K / 1 K Bytes of LDROM, which provides flexibility to user developed Boot Code
	-	2 K bytes SRAM
	-	256 Bytes on-chip RAM
	-	Flash Memory accumulated with pages of 128 Bytes each
	-	Built-in In-Application-Programmable ( IAP )

•	Clocks
	-	External clock input ( 32 K body only )
	-	16 MHz high-speed internal oscillator trimmed to ± 1 % when V_DD 5.0 V, ± 2 % in all conditions.
	-	24 MHz high-speed internal oscillator trimmed to ± 1 % when V_DD 5.0 V, ± 2 % in all conditions
	-	10 kHz low-speed internal oscillator
	-	On-the-fly clock source switch via software

•	Power management
	-	Brown-out detection ( BOD ) with low power mode available, 4-level selection, interrupt or reset options
	-	Power-on reset ( POR )

•	Peripherals
	-	Two 16-bit Timers / Counters 0 and 1 compatible with standard 8051
	-	One 16-bit Timer 2 with three-channel input capture module and 9 input pin can be selected
	-	One 16-bit auto-reload Timer 3, which can be the baud rate clock source of UARTs
	-	One 16-bit PWM counter interrupt for timer
	-	12-channel 16-bit pulse width modulator (PWM) output, with different modes and Fault Brake function for motor control
	-	One programmable Watchdog Timer ( WDT )
	-	One dedicated Self Wake-up Timer ( WKT )
	-	2 sets of full-duplex UART ports with frame error detection and automatic address recognition
	-	1 set of SPI port with master and slave modes, up to 12 Mbps when system clock is 24 MHz
	-	1 set of I²C bus with master and slave modes, up to 400 kbps data rate
	-	15 channels of 12-bit ADC, up to 500 ksps converting rate
	-	26 general purpose I/O pins and 1 input-only pin
	-	Programmable pull-ups pull-lows

•	Development Tools
	-	Nuvoton Nu-Link with KEILTM and IAR development environment
	-	Nuvoton Nu-Link In-Circuit-Programmer
	-	Nuvoton In-System-Programming ( ISP )

•	96-bit Unique ID ( UID )

•	128-bit Unique Customer ID ( UCID )

•	2-Byte ( 16-bit ) PDID

•	Package
	-	TSSOP28