Low Power MUG51 Series

View larger

Send to a friend

Send to a friend

MUG51TB9AE

Quantity Unit Price (USD)

1-99 1.50

100-499 1.25

500-999 0.96

1000-1999 0.80

2000-4999 0.73

5000+ Contact

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

MUG51TB9AE

Quantity	Unit Price (USD)
1-99	1.50
100-499	1.25
500-999	0.96
1000-1999	0.80
2000-4999	0.73
5000+	Contact

More details

Reference MUG51TB9AE

Condition New

Quantity 439 Item Items

Quantity :

More info
Specification
-

Sample Price (90% off of first 5 MCUs)

MUG51TB9AE is a Flash embedded 1T 8051-based low-power microcontroller. It runs up to 7.3728 MHz with 16 Kbytes embedded Flash memory, 1 Kbytes embedded SRAM, 4 Kbytes Flash loader memory (LDROM), 1.8V ~ 5.5V operating voltage, and -40°C ~105°C operating temperature. MUG51TB9AE supports enhanced low current consumption at 200 μA while CPU power-on before Flash memory is initialized. Its low-power feature makes it suitable for battery-free device which harvests power from the magnetic field of coil such as stylus pen powered by EMR (Electro-magnetic Resonance) technology and RFID card.

MUG51TB9AE features low current consumption at 200 μA while CPU power-on before Flash memory is initialized. It is suitable for battery-free devices such as stylus pen powered by EMR (Electro-magnetic Resonance) technology and RFID card. The current consumption is less than 1.3 mA in normal run mode at 7.3728 MHz, and less than 1 μA in Power-down mode.

MUG51TB9AE provides rich peripherals including 24 general purpose I/Os with internal inverter, four 16-bit Timers/Counters, 2 sets of UARTs with frame error detection and automatic address recognition, 1 set of ISO7816 Smartcard interface, 1 set of SPI, 2 sets of I²C, 6 enhanced PWM output channels with dead zone control, 2 sets of analog comparators, eight-channel shared pin interrupt for all I/O ports, low voltage reset (LVR) and brown-out detector (BOD) to enhance product performance, reduce external components and form factor simultaneously.

MUG51TB9AE includes the QFN33 (4mm x 4mm) package.

Target application：

Stylus pen
RFID card

Features:

•	Operating Characteristics
	-	Voltage range: 1.8V to 5.5V
	-	Temperature range: -40°C to 105°C
	-	EFT 4.4 KV
	-	ESD HBM 7 KV

•	Core
	-	1T 8051-based core running up to 7.3728 MHz

•	Memory
	-	16 KB Flash
	-	1 KB SRAM
	-	Up to 4 KB Flash for user program loader (LDROM)
	-	ISP/ICP/IAP programming
	-	128 Bytes SPROM

•	Clocks
	-	Internal 7.3728 MHz MIRC oscillator with variation ±10 % within all temperature range
	-	Internal 38.4 kHz LIRC for low-power operating mode

•	Power Management
	-	Integrated with Power-on Reset, Brown-out Reset and Low voltage Reset
	-	Normal run: 1.08 mA at 7.3728 MHz
	-	Power-down: 1 μA
	-	Power-on before Flash memory is initialized：200 μA
	-	Supports wake up from Power-down mode by: ACMP, GPIO, WDT, TIMER, UART, I²C, SPI, PDMA, PWM

•	Timer
	-	Four 16-bit timers
	-	16-bit PWM (Up to 6 channels)
	-	One Independent watchdog
	-	One Wake-up timer

•	PDMA
	-	Up to 2 channels

•	Analog
	-	Two rail-to-rail comparators (ACMP)

•	Communication Interface
	-	2 sets of UART for simple TX/RX operation
	-	2 sets of 400 kHz I2C interfaces
	-	1 set of SPI interface
	-	1 set of ISO 7816-3 interface supporting full-duplex UART mode

•	Up to 24 I/O with interrupt capability
	-	Schmitt trigger input
	-	Four I/O modes
	-	Supports Schmitt type (TTL input Not supported)

•	Serial Wire Debug (SWD)
	-	Nuvoton Nu-Link debugger support

•	Development Platform Support
	-	Nuvoton Nu-Link with Keil and IAR development environment.
	-	ICP (In Circuit Programmer) support for updating internal code via Nu-Link debugger
	-	ISP (In System Programmer) support for updating internal code through UART, SPI, I2C, RS-485 peripheral interface
	-	Pin Viewer for real time monitoring the status of all I/O pins
	-	PinConfigure tool for pin assignment, initial code generation and OrCAD/Protel part generation

•	Package
	-	QFN33 (4 mm x 4 mm)