DATASHEET
The M481ZIDAE is a high performance, low power microcontroller powered by the Arm® Cortex®-M4F core with DSP extension. It can run up to 192 MHz with 175 µA/MHz dynamic low power consumption. The 512 KB embedded dual bank Flash memory supports OTA (Over-The-Air) firmware upgrade, and the 160 KB embedded SRAM includes 32 KB cache to speed up external SPI Flash code execution. The factory pre-loaded bootloader delivers Secure Boot functionality to provide the code integrity check in embedded Flash memory. The built-in Secure Protection ROM provides a safe space for saving confidential program or data. One-Time Programmable ROM is also included for product life-cycle management.
The M481ZIDAE supports operating voltage from 1.8V to 3.6V, and industrial operating temperature from -40°C to 105°C. It is equipped with high speed UART/ SPI/ I²C/ PWM peripherals. Package type is QFN33.
Target Application:
IoT Device, Data Collector, etc.
Key Features:
• |
Core |
|
- |
Up to 192 MHz Arm® Cortex ®-M4F delivering 1.25 DMIPS per MHz |
|
- |
DSP instruction set |
|
- |
Memory Protection Unit (MPU) |
|
|
• |
Memory |
|
- |
256 KB zero-wait state Flash memory |
|
- |
96 KB RAM, including 32 KB external SPI Flash cache |
|
- |
4 KB Secure Protection ROM |
|
- |
2 KB One-Time-Programmable ROM |
|
|
• |
Cyclic Redundancy Calculation Unit |
|
|
• |
16-ch Peripheral DMA Controller |
|
|
• |
Clocks |
|
- |
4 to 24 MHz crystal oscillator |
|
- |
32 kHz oscillator for RTC |
|
- |
Internal 12 MHz RC oscillator |
|
- |
Internal 10 kHz RC oscillator |
|
- |
Internal PLL up to 480 MHz |
|
|
• |
RTC |
|
- |
80 bytes of battery-powered backup registers |
|
|
• |
Timer & PWM |
|
- |
Four 32-bit timers |
|
- |
Twelve Enhanced PWM with twelve 16-bit timers |
|
- |
Twelve Basic PWM with two 16-bit timers |
|
- |
One 24-bit count-down SysTick timer |
|
- |
One watchdog timer |
|
- |
One window watchdog timer |
|
• |
Analog Peripheral |
|
- |
One 12-bit, up to 10-ch 5MSPS SAR ADC |
|
- |
Two 12-bit, 1 MSPS DAC |
|
- |
Two rail-to-rail comparators |
|
- |
One operational amplifiers |
|
|
• |
Communication Interface |
|
- |
Up to 6 low power UART interfaces (17 Mbps), including 2 LIN interfaces |
|
- |
Up to 3 ISO-7816 interfaces (3.4 MHz), supporting full duplex UART mode |
|
- |
Three I²C interfaces (Up to 3.4 Mbps) |
|
- |
One SPI Flash interface (Up to 96 MHz) supports quad mode |
|
- |
One Quad-SPI interface (Up to 96 MHz) |
|
- |
Up to 3 SPI/ I²S interfaces (SPI up to 96 MHz, I²S up to 192 kHz/16-bit) |
|
- |
One I²S interface (192 kHz/32-bit) |
|
- |
Two USCI interfaces, supporting configurable UART/ SPI/ I²C |
|
- |
One secure Digital Host Controllers (50 MHz) |
|
|
• |
Control Interface |
|
- |
One quadrature encoder interfaces |
|
|
• |
Operating Characteristic |
|
- |
Voltage range: 1.8V to 3.6V |
|
- |
Temperature range: -40°C to +105°C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more details and documents, please link to Nuvoton Official Website GO