Quantity | Unit Price (USD) | |
1-99 | 1.53 | |
100-499 | 1.17 | |
500-999 | 0.98 | |
1000-1999 | 0.88 | |
2000-4999 | 0.85 | |
5000+ | Contact |
The NuMicro® M0A21EC1AC is a 32-bit microcontroller based on Arm® Cortex®-M0 core. It provides compact package with highly flexible digital pin function assignment, rich analog peripherals, -40 ℃ to 125 ℃ operating temperature, 2.4V ~ 5.5V operating voltage and LIN interface for robust communication. The NuMicro® M0A21EC1AC targets on robust and high operating temperature applications, such as 24 GHz mmWave radar, car lighting, electric window lifter, power seat and intelligent power supply.
The NuMicro® M0A21EC1AC provides TSSOP28 package with rich analog and digital functions, which are especially suitable for small form factor applications. TSSOP28 provides up to 26 IO pins. Each IO pin of the M0A21EC1AC can be arbitrarily assigned to digital peripherals, such as UART, SPI and PWM. The M0A21EC1AC provides rich analog functions including 17-ch 12-bit 500 KSPS ADC, 1 set of 5-bit DAC and 2 sets of ACMP in TSSOP28 package. Moreover, it provides low voltage reset (LVR) and brown-out detector (BOD) to ensure the system safety.
The NuMicro® M0A21EC1AC runs up to 48 MHz and supports hardware divider. It provides 32 Kbytes Flash memory, 4 Kbytes SRAM and 2 Kbytes LDROM for ISP (In-System Programming) feature for easily firmware update. It is equipped with plenty of peripherals including up to four 32-bit timers, 6-ch 16-bit PWM generators, 2 sets of LIN function, 5-ch PDMA, 2 sets of UART with One-Wire mode, IrDA and RS485 functions. Besides, the M0A21EC1AC provides two sets of Universal Serial Control Interfaces (USCI) that can be configured as UART, SPI or I²C.
The package types of the M0A21EC1AC is TSSOP28 (4.4x9.7x1.0 mm).
Target applications:
Key Features:
• | Core | |
- | Arm® Cortex®-M0 core running up to 48 MHz | |
- | Single-cycle 32-bit hardware divider | |
• | Memories | |
- | 32 KB Flash for program code | |
- | Up to 4 KB SRAM | |
- | 2 KB SRAM | |
- | Supports In-System-Program (ISP) and In-Application-Program (IAP) application code update | |
• | Peripheral DMA (PDMA) | |
- | Supports up to 5 independent configurable channels for automatic data transfer between memories and peripherals | |
• | CRC calculation unit | |
- | Supports CRC-CCITT, CRC-8, CRC-16 and CRC-32 polynomials | |
• | Clocks | |
- | Internal 48 MHz RC oscillator (frequency drift <± 2 % @ - 40 ℃ ~ 105°C, <± 3 % @- 40 ℃ ~ 125 °C) | |
- | Internal 38.4 kHz RC with calibration (frequency drift <± 10 % @ - 40 ℃ ~105 ℃ , < ± 15 % @ - 40 ℃ ~ 125 ℃ ) | |
- | 4 to 24 MHz crystal oscillator | |
- | 32.768 kHz crystal oscillator | |
• | Timers/PWM | |
- | 4 sets of 32-bit timers | |
- | 6-ch 48 MHz 16-bit PWM | |
- | One 24-bit SysTick Timer | |
- | Watchdog Timer | |
- | Window Watchdog Timer | |
• | Analog | |
- | 17-ch 12-bit 500 kSPS ADCs | |
- | Two analog comparators (ACMP) | |
- | One 5-bit DAC | |
- | One built-in temperature sensor | |
• | Communication interfaces | |
- | 2 sets of UART interfaces with One-Wire mode, IrDA, RS-485 and LIN function | |
- | 2 sets of USCI interfaces to be configured as UART, SPI or I²C | |
• | Up to 26 GPIOs in TSSOP28 | |
• | Operating Characteristics | |
Voltage range: 2.4 V to 5.5 V | ||
Temperature range: - 40 ℃ to 125 ℃ | ||
• | 96-bit Unique ID (UID) | |
- | Can be used as a security key | |
• | 128-bit Unique Customer ID (UCID) | |
• | Package | |
- | TSSOP28 |
For more details and documents, please link to Nuvoton Official Website GO
Quantity | Discount | You Save |
---|---|---|
100 | 23.2% | Up to$35.50 |
500 | 36% | Up to$275.40 |
1000 | 42% | Up to$642.60 |
2000 | 44% | Up to$1,346.40 |
Part No. | M0A21EC1AC |
Package | TSSOP28 |