M485YIDAE

The M485YIDAE is a high performance, low power microcontroller powered by the Arm^® Cortex^®-M4F core with DSP extension. It can run up to 192 MHz with 175 µA/ MHz dynamic low power consumption. The 512 KB embedded dual bank Flash memory supports OTA ( Over-The-Air ) firmware upgrade, and the 160 KB embedded SRAM includes 32 KB cache to speed up external SPI Flash code execution. The factory pre-loaded bootloader delivers Secure Boot functionality to provide the code integrity check in embedded Flash memory. The built-in Secure Protection ROM provides a safe space for saving confidential program or data. One-Time Programmable ROM is also included for product life-cycle management.

The M485YIDAE supports operating voltage from 1.8V to 3.6V, and industrial operating temperature from - 40 ℃ to 105 ℃ . It is embedded with hardware cryptography engine and USB FS OTG. Package type is QFN48.

Applications

• Fingerprint Module, Smart payment, Secure IoT device, secure USB Device, etc.

Key Features

• Core
  • Up to 192 MHz Arm^® Cortex ^®-M4F delivering 1.25 DMIPS per MHz
  • DSP instruction set
  • Memory Protection Unit ( MPU )
• Memory
  • 512 KB zero-wait state Flash memory
  • 160 KB RAM, including 32 KB external SPI Flash cache
  • 4 KB Secure Protection ROM
  • 2 KB One-Time-Programmable ROM
• Cyclic Redundancy Calculation Unit
• 16-ch Peripheral DMA Controller
• External Bus Interface
  • LCD parallel interface, i80 mode
• Clocks
  • 4 to 24 MHz crystal oscillator
  • 32 kHz oscillator for RTC
  • Internal 12 MHz RC oscillator
  • Internal 10 kHz RC oscillator
  • Internal PLL up to 480 MHz
• RTC
  • 80 bytes of battery-powered backup registers
• Timer & PWM
  • Four 32-bit timers
  • Twelve Enhanced PWM with twelve 16-bit timers
  • Twelve Basic PWM with two 16-bit timers
  • One 24-bit count-down SysTick timer
  • One watchdog timer
  • One window watchdog timer
• Cryptography Accelerator
  • ECC ( P-521, B-571, K-571 )
  • AES-128, 192, 256
  • DES/ 3DES
  • SHA-160, 224, 256, 384, 512
  • HMAC
  • Random number generator
• Analog Peripheral
  • One 12-bit, up to 16-ch 5MSPS SAR ADC
  • Two 12-bit, 1 MSPS DAC
  • Two rail-to-rail comparators
  • Two operational amplifiers
• Communication Interface
  • Up to 6 low power UART interfaces ( 17 Mbps ) , including 2 LIN interfaces
  • Up to 3 ISO-7816 interfaces ( 3.4 MHz ) , supporting full duplex UART mode
  • Three I²C interfaces ( Up to 3.4 Mbps )
  • One SPI Flash interface ( Up to 96 MHz ) supports quad mode
  • One Quad- SPI interface ( Up to 96 MHz )
  • Up to 3 SPI / I²S interfaces ( SPI up to 96 MHz , I²S up to 192 kHz/16-bit )
  • One I²S interface ( 192 kHz/32-bit )
  • Two USCI interfaces, supporting configurable UART / SPI / I²C
  • Two CAN 2.0B interfaces
  • One Secure Digital Host Controllers ( 50 MHz )
• Control Interface
  • Two quadrature encoder interfaces
  • One 24-bit, 3-ch input capture timer/counter units
• Advanced Connectivity
  • USB 2.0 full speed device/ host/ OTG controller with on-chip PHY
• Operating Characteristic
  • Voltage range: 1.8V to 3.6V
  • Temperature range: - 40 ℃ to +105 ℃

Technical Documents

• For more details, please visit Nuvoton Official Website: GO