M254/M256/M258 Low Power LCD Series

View larger

Send to a friend

Send to a friend

M258KE3AE

Quantity Unit Price (USD)

1-99 2.88

100-499 2.21

500-999 1.84

1000-1999 1.67

2000-4999 1.61

5000+ Contact

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

M258KE3AE

Quantity	Unit Price (USD)
1-99	2.88
100-499	2.21
500-999	1.84
1000-1999	1.67
2000-4999	1.61
5000+	Contact

More details

Condition New

Quantity 265 Item Items

Quantity :

The NuMicro M258KE3AE 32-bit microcontroller is based on Arm Cortex-M23 core using Armv8-M architecture with COM/SEG LCD driver, capacitive touch sensing function, and USB 2.0 full speed device.. It runs up to 48 MHz and features 128 Kbytes Flash memory, 16 Kbytets SRAM, 1.75V ~ 5.5V wide operating voltage, 5V I/O tolerance, and -40℃ to +105℃ operating temperature.

M258KE3AE includes a 8 x 44, 6 x 46, 4 x 48 COM/SEG LCD driver with selectable bias voltage and duty, and it also built-in charge-pump to support 3V to 5V wide voltage of LCD panel; Capacitive touch sensing function with up to 16 touch-keys with single-scan or programmable periodic key-scans is supported; it also equipped with a crystal-less USB 2.0 full speed device, compling with USB Battery Charging Detection v1.2 (BC 1.2) profile for high-speed battery charging.

M258KE3AE provides plenty of peripherals such as Timers, Watchdog Timers, RTC, 5 channels of PDMA, 3 sets of UART, 1 setof Universal Serial Control Interface (USCI), 1 set of SPI/ I²S, 1 set of I²C, 1 set of ISO-7816-3, 6 channels of basic PWM, making it highly suitable for connecting comprehensive external modules. It also integrates high performance analog circuit, such as 16 channels of 12-bit 730 kSPS ADC, and a temperature sensor to reduce external components.

Supported packages LQFP128 (14mm x 14mm) with pin-compatible for different part numbers make the system design and parts change easily.

Target Application:

Handheld meter
Thermostat
Smart Home / Home Appliance
Industrial Control / Industrial Automation
Temperature/Humidity Logger

Key Features:

•	Operating Characteristics
	-	Voltage range: 1.75V ~ 5.5V
	-	Temperature range: - 40 ℃ ~ 105 ℃
	-	EFT 4.4 KV
	-	ESD HBM 7 KV

•	Core
	-	Arm Cortex-M23 core using Armv8-M architecture, running up to 48 MHz, without TrustZone
	-	32-bit hardware multiplier/divider

•	Memories
	-	128 KB Flash
	-	16 KB SRAM
	-	4 KB LDROM
	-	1-region eXecute-Only-Memory (XOM)
	-	ISP/ICP/IAP programming

•	Clocks
	-	4 ~ 32 MHz external high speed crystal oscillator (HXT) for precise timing operation
	-	32.768 kHz external low speed crystal oscillator (LXT) for RTC function and low-power system operation
	-	48 MHz internal high speed RC oscillator (HIRC) for system operation (Factory pre-trimmed to ±0.25% and frequency deviation ±2.5% over entire temperature from -40°C ~ 105 °C)
	-	4.032 MHz internal high speed RC oscillator (MIRC) for system operation
	-	38.4 kHz internal low speed RC oscillator (LIRC) for Watchdog Timer and wake-up operation

•	COM/SEG LCD Driver
	-	8 x 44, 6 x 46 & 4 x 48 COM/SEG LCD Driver
	-	Built-in charge-pump feature
	-	Supports 3V to 5V LCD panel
	-	Supports 1/2, 1/3 and 1/4 bias voltage
	-	Supports 1/4 duty, 1/6 duty and 1/8 duty

•	Capacitive Touch Sensing
	-	Up to 16 touch keys with single-scan or programmable periodic key-scans features

•	Power management
	-	Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
	-	Built-in LDO Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
	-	Built-in LDO
	-	Support RTC with independent V_BATvoltage source pin

•	Low Power Consumption
	-	110 μA/MHz in operating mode
	-	3.8 μA in Power-down mode (RTC on, RAM retention)
	-	2.2 μA in Power-down mode (RTC off, RAM retention)
	-	1.6 μA in Deep Power-down mode

•	Timers
	-	Four 32-bit timers
	-	One 24-bit SysTick timer
	-	One independent watchdog
	-	One window watchdog
	-	RTC with Calendar and Alarm

•	PDMA
	-	5 channels

•	Analog
	-	16 channels of 12-bit 730 kSPS ADC
	-	2 sets of rail-to-rail analog comparators (ACMP)

•	Communication interfaces
	-	3 sets of UART interfaces
	-	1 set of I²C interfaces
	-	1 set of SPI/I²S
	-	1 set of Smart Card Interface (ISO-7816-3)
	-	1 set of USCI (configured as UART, SPI or I²C)

•	USB
	-	Up to 1 set of USB 2.0 full speed device with on-chip PHY (crystal-less design)
	-	Supports USB Battery Charging Detection v1.2 (BC 1.2) profile

•	96-bit Unique ID ( UID )

•	128-bit Unique Customer ID ( UCID )

•	Packages
	-	LQFP128 ( 14 mm x 14 mm )