M254/M256/M258 Low Power LCD Series

View larger

Send to a friend

Send to a friend

M254SD2AE

Quantity Unit Price (USD)

1-99 1.75

100-499 1.34

500-999 1.12

1000-1999 1.02

2000-4999 0.98

5000+ Contact

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

M254SD2AE

Quantity	Unit Price (USD)
1-99	1.75
100-499	1.34
500-999	1.12
1000-1999	1.02
2000-4999	0.98
5000+	Contact

More details

Condition New

Quantity 245 Item Items

Quantity :

More info
Specification
-

Sample Price (90% off of first 5 MCUs)

The NuMicro M254SD2AE 32-bit microcontroller is based on Arm Cortex-M23 core using Armv8-M architecture with COM/SEG LCD driver. It runs up to 48 MHz and features 64 Kbytes Flash memory, 8 Kbytets SRAM, 1.75V ~ 5.5V wide operating voltage, 5V I/O tolerance, and -40℃ to 105℃ operating temperature.

M254SD2AE includes a 8 x 28, 6 x 30, 4 x 32 COM/SEG LCD driver with selectable bias voltage and duty, and it also built-in charge-pump to support 3V to 5V wide voltage of LCD panel.

M254SD2AE provides plenty of peripherals such as Timers, Watchdog Timers, RTC, 5 channels of PDMA, 3 sets of UART, 1 setof Universal Serial Control Interface (USCI), 1 set of SPI/ I²S, 1 set of I²C, 1 set of ISO-7816-3, 6 channels of basic PWM, making it highly suitable for connecting comprehensive external modules. It also integrates high performance analog circuit, such as 16 channels of 12-bit 730 kSPS ADC, and a temperature sensor to reduce external components.

Supported packages LQFP64 ( 7 mm x 7 mm ) with pin-compatible for different part numbers make the system design and parts change easily.

Target Application:

Handheld meter
Thermostat
Smart Home / Home Appliance
Industrial Control / Industrial Automation
Temperature/Humidity Logger

Key Features:

•	Operating Characteristics
	-	Voltage range: 1.75V ~ 5.5V
	-	Temperature range: - 40 ℃ ~ 105 ℃
	-	EFT 4.4 KV
	-	ESD HBM 7 KV

•	Core
	-	Arm Cortex-M23 core using Armv8-M architecture, running up to 48 MHz, without TrustZone
	-	32-bit hardware multiplier/divider

•	Memories
	-	64 KB Flash
	-	8 KB SRAM
	-	4 KB LDROM
	-	1-region eXecute-Only-Memory (XOM)
	-	ISP/ICP/IAP programming

•	Clocks
	-	4 ~ 32 MHz external high speed crystal oscillator (HXT) for precise timing operation
	-	32.768 kHz external low speed crystal oscillator (LXT) for RTC function and low-power system operation
	-	48 MHz internal high speed RC oscillator (HIRC) for system operation (Factory pre-trimmed to ±0.25% and frequency deviation ±2.5% over entire temperature from -40°C ~ 105 °C)
	-	4.032 MHz internal high speed RC oscillator (MIRC) for system operation
	-	38.4 kHz internal low speed RC oscillator (LIRC) for Watchdog Timer and wake-up operation

•	COM/SEG LCD Driver
	-	8 x28, 6 x 30 & 4 x 32 COM/SEG LCD Driver
	-	Built-in charge-pump feature
	-	Supports 3V to 5V LCD panel
	-	Supports 1/2, 1/3 and 1/4 bias voltage
	-	Supports 1/4 duty, 1/6 duty and 1/8 duty

•	Power management
	-	Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
	-	Built-in LDO Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
	-	Support RTC with independent V_BATvoltage source pin

•	Low Power Consumption
	-	110 μA/MHz in operating mode
	-	3.8 μA in Power-down mode (RTC on, RAM retention)
	-	2.2 μA in Power-down mode (RTC off, RAM retention)
	-	1.6 μA in Deep Power-down mode

•	Timers
	-	Four 32-bit timers
	-	One 24-bit SysTick timer
	-	One independent watchdog
	-	One window watchdog
	-	RTC with Calendar and Alarm

•	PDMA
	-	5 channels

•	Analog
	-	16 channels of 12-bit 730 kSPS ADC
	-	2 sets of rail-to-rail analog comparators (ACMP)

•	Communication interfaces
	-	3 sets of UART interfaces
	-	1 set of I²C interfaces
	-	1 set of SPI/I²S
	-	1 set of Smart Card Interface (ISO-7816-3)
	-	1 set of USCI (configured as UART, SPI or I²C)

•	96-bit Unique ID ( UID )

•	128-bit Unique Customer ID ( UCID )

•	Packages
	-	LQFP64 ( 7 mm x 7 mm )