首頁

View larger

Send to a friend

Send to a friend

M253LD3AE

Quantity Unit Price (USD)

1-99 2.15

100-499 1.65

500-999 1.38

1000-1999 1.25

2000-4999 1.20

5000+ Contact

Recipient :

Name of your friend ^* :

E-mail address of your friend ^* :

^* Required fields

or Cancel
Print

M253LD3AE

Quantity	Unit Price (USD)
1-99	2.15
100-499	1.65
500-999	1.38
1000-1999	1.25
2000-4999	1.20
5000+	Contact

More details

Condition New

Quantity 345 Item Items

Quantity :

M253LD3AE 32-bit microcontroller is based on Arm Cortex-M23 core for Armv8-M architecture. It runs up to 48 MHz and features 128 Kbytes Flash, 16 Kbytets SRAM, 1.75V ~ 5.5V wide operating voltage, and -40°C to +105°C operating temperature.

M253LD3AE includes a crystal-less USB 2.0 full speed device and one set of CAN FD interface. The USB interface supports up to 17 configurable endpoints, up to 5 VCOMs, and maximum 1 Kbytes buffer size.

M253LD3AE provides plenty of peripherals such as Timers, Watchdog Timers, 5 channels of PDMA, 5 sets of UART, 2 sets of I²C, 1 set of SPI/I²S and 1 set of Universal Serial Control Interface (USCI). It also includes high performance analog front-end circuit blocks, such as 12 channels of 12-bit 880 kSPS ADC, 6 channels of 16-bit PWM, and a temperature sensor to enhance product performance, to reduce external components and form factor simultaneously.

Supported packages LQFP48 (7mm x 7mm) with pin-compatible for different part numbers make the system design and parts change easily.

Target Application:

USB Bridge
Data Collector
Battery Management System
Automotive Related Module

Key Features:

•	Operating Characteristics
	-	Voltage range: 1.75V ~ 5.5V
	-	Temperature range: - 40 ℃ ~ 105 ℃
	-	EFT 4.4 KV
	-	ESD HBM 7 KV

•	Core
	-	Arm Cortex-M23 core using Armv8-M architecture, running up to 48 MHz, without TrustZone
	-	32-bit hardware multiplier/divider

•	Memories
	-	64 KB Flash
	-	16 KB SRAM
	-	4 KB LDROM
	-	ISP/ICP/IAP programming

•	Clocks
	-	4 ~ 32 MHz external high speed crystal oscillator (HXT) for precise timing operation
	-	32.768 kHz external low speed crystal oscillator (LXT) for RTC function and low-power system operation
	-	48 MHz internal high speed RC oscillator (HIRC) for system operation (Factory pre-trimmed to ±0.25% and frequency deviation ±2.5% over entire temperature from -40°C ~ +105 °C
	-	4.032 MHz internal high speed RC oscillator (MIRC) for system operation
	-	38.4 kHz internal low speed RC oscillator (LIRC) for Watchdog Timer and wake-up operation

•	Power management
	-	Integrated with Power-on Reset, Brown-out Reset and Low Voltage Reset
	-	Built-in LDO

•	Low Power Consumption
	-	130 μA/MHz in operating mode
	-	35 μA/MHz in idle mode
	-	1.7 μA in Power-down mode (RTC off, RAM retention)

•	Timers
	-	Four 32-bit timers
	-	One 24-bit SysTick timer
	-	One independent watchdog
	-	One window watchdog
	-	RTC with Calendar and Alarm

•	PDMA
	-	5 channels
	-	Channel can be operated by – software trigger, SPI/I²S, UART, I²C, USCI, ADC and Timer

•	Analog
	-	12 channels of 12-bit 880 kSPS ADC

•	Communication interfaces
	-	5 sets of UART interfaces
	-	2 sets of I²C interfaces
	-	1 set of SPI/I²S
	-	1 set of USCI (configured as UART, SPI or I²C)

•	CAN FD
	-	1 set of CAN FD controller with up to 64 data bytes per message
	-	Compliant with CAN protocol version 2.0 part A, B and ISO 11898-1: 2015
	-	Programmable receive and transmit FIFO
	-	Accessible 1-Kbyte RAM memory to allocate up to 256 words

•	USB
	-	Supports 17 endpoints for configurable Control/Bulk/Interrupt/Isochronous transfer types and maximum 1024 bytes’ buffer size
	-	Compliant with USB 2.0 Full-Speed specification
	-	Provides 1 interrupt vector with 4 different interrupt events (NEVWK, VBUSDET, USB and BUS)

•	96-bit Unique ID ( UID )

•	128-bit Unique Customer ID ( UCID )

•	Packages
	-	LQFP48 ( 7 mm x 7 mm )