> MCU>8bit 8051 MCUs>MS51XB9BE

8bit 8051 MCUs

MS51XB9BE View larger


Add to my wishlist

MS51XB9BE

Quantity

Unit Price (USD)

1-99

0.53

100-499

0.44

500-999

0.34

1000-1999

0.28

2000-4999

0.26

5000+

Contact

More details

MS51XB9BE

New

1000 Items

$0.53

MS51XB9BE

The NuMicro® MS51XB9BE is an 1T-8051-based CMOS microcontroller, running at speeds up to 24 MHz. It features 16 KB of Flash Memory, 1 KB of SRAM, and 4 KB of loader ROM for in-system programming (ISP). This microcontroller is equipped with a wide range of peripherals, including 2 sets of UART, 1 set of I²C, 1 set of SPI, 18 GPIO pins, 8-channel 12-bit ADC, a watchdog timer, and 6-channel 16-bit PWM. The package is available in QFN20 (3.0 X 3.0 mm).

Target Application:

  • LED lighting
  • Home appliances
  • Industrial control
  • Stepper motor
  • Battery management system
  • Power supplies

Key Features:

• Operating Characteristics
  - Voltage range: 2.4V to 5.5V
  - Temperature range: - 40 ℃ to + 105 ℃
  - EFT 4 kV
   
• Core
  - 1T 8051-based CMOS microcontroller running up to 24 MHz
     
• Memories
  - 16 K bytes Flash
  - Configurable 4 K / 3 K / 2 K / 1 K Bytes of LDROM, which provides flexibility to user developed Boot Code
  - 1 KB bytes SRAM
  - 256 Bytes on-chip RAM
  - Flash Memory accumulated with pages of 128 Bytes each
  - Built-in In-Application-Programmable ( IAP )
     
• Clocks
  - External clock input ( 32 K body only )
  - 16 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions.
  - 24 MHz high-speed internal oscillator trimmed to ± 1 % when VDD 5.0 V, ± 2 % in all conditions
  - 10 kHz low-speed internal oscillator
  - On-the-fly clock source switch via software
   
• Power management
  - Brown-out detection ( BOD ) with low power mode available, 4-level selection, interrupt or reset options
  - Power-on reset ( POR )
     
• Peripherals
  - Two 16-bit Timers / Counters 0 and 1 compatible with standard 8051
  - One 16-bit Timer 2 with three-channel input capture module and 9 input pin can be selected
  - One 16-bit auto-reload Timer 3, which can be the baud rate clock source of UARTs
  - One 16-bit PWM counter interrupt for timer
  - 6-channel 16-bit pulse width modulator (PWM) output, with different modes and Fault Brake function for motor control
  - One programmable Watchdog Timer ( WDT )
  - One dedicated Self Wake-up Timer ( WKT )
  - 2 sets of full-duplex UART ports with frame error detection and automatic address recognition
  - 1 set of SPI port with master and slave modes, up to 12 Mbps when system clock is 24 MHz
  - 1 set of I²C bus with master and slave modes, up to 400 kbps data rate
  - 8 channels of 12-bit ADC, up to 500 ksps converting rate
  - 18 general purpose I/O pins and 1 input-only pin
  - Programmable pull-ups pull-lows
     
• Development Tools
  - Nuvoton Nu-Link with KEILTM and IAR development environment
  - Nuvoton Nu-Link In-Circuit-Programmer
  - Nuvoton In-System-Programming ( ISP )
     
• 96-bit Unique ID ( UID )
     
• 128-bit Unique Customer ID ( UCID )
   
• 2-Byte ( 16-bit ) PDID
   
• Package
  - QFN20 (3.0 X 3.0 mm)
   
• Evaluation Board
  - NuTiny-MS51FB

For more details And documents, please link To Nuvoton Official Website GO

-

QuantityDiscountYou Save
10016.98%Up to$9.00
50035.85%Up to$95.00
100047.17%Up to$250.00
200050.94%Up to$539.96
Part No.MS51XB9BE
Flash (Kbytes)16
SRAM (Kbytes)1
Operating Voltage (V)2.4 to 5.5
PackageQFN20 (3.0 X 3.0 mm)
Operating Temp. Range -40 to +105

30 other products in the same category: