{"title":"Arm Cortex-A35 MPUs","description":"","products":[{"product_id":"numaker-iot-ma35d1-a1","title":"NuMaker-IoT-MA35D1-A1","description":"\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=KpFOSP7dovQ\u003c\/p\u003e\u003ch5\u003eMA35D1 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series is a heterogeneous multi-core microprocessor targeted to high-end edge IIoT gateway. It is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speed up to 800 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Based on the high-performance cores, the MA35D1 series facilities the tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D1 supports 16-bit DDR2 and DDR3\/ DDR3L SDRAM. For an easy system design and manufacture, the MA35D1 series also offers LQFP and BGA packages stacked with the DDR2\/DDR3L SDRAM and density up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D1 series is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI) an isolated secure hardware unit, TrustZone, secure boot, tamper-detection, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D1 series provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003cp\u003eFor HMI applications, the MA35D1 series provides a LCD display controller with the resolution up to 1920x1080 at 60 FPS, a 2D graphic engine, a JPEG and a H.264 decoder integrated for better graphical HMI effects and video playback.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D1-A1\u003c\/h5\u003e\u003cp\u003eThe NuMaker-IoT-MA35D1-A1 evaluation board provides the Ethernet and connectivity features of Nuvoton NuMicro MA35D1 series microprocessors, based on MA35D16F987C (LQFP216 package, and stacking a 512 MB DDR). The NuMaker-IoT-MA35D1-A1 includes rich peripherals such as one set of Gigabit Ethernet, one set of Megabit Ethernet, high-speed USB2.0 Host and device, one set of SD3.0 in MicroSD slot, one set of CAN FD, and RS-485 and RS232 serial communication ports. Furthermore, the NuMaker-IoT-MA35D1-A1 provides discrete power supply to be the reference design. It also provides compatible headers with Raspberry Pi and Arduino UNO for minimizing effort in connecting popular sensors and modules to the system. Based on these features, it helps user to facilitate the evaluation in IIoT Edge Gateway, Smart Building, Smart Agriculture, T-Box, 4G\/5G Base Station, or your creative applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D1-A1 Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Chip: MA35D16F987C (LQFP216) MCP package with DDR3L (512 MB), which can run up to 800 MHz\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDual Cortex-A35 core running up to 800 MHz\u003c\/li\u003e\n\u003cli\u003eCortex-M4 processor core running up to 180 MHz\u003c\/li\u003e\n\u003cli\u003eReal-Time Clock (RTC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e5V\/2A Power Jack, USB VCOM Port or HSUSB0 Device\u003c\/li\u003e\n\u003cli\u003eBattery header for RTC power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebug:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUART debug port (UART0): USB Virtual COM (VCOM) port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Devices\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003ePower-on Setting DIP switches for system booting selection\u003c\/li\u003e\n\u003cli\u003eQuad SPI Flash (QSPI0): Winbond SPI-NAND Flash W25N04KWZEIR (512 MB)\u003c\/li\u003e\n\u003cli\u003eNAND Flash: Winbond NAND Flash W29N08GVSIAA (1 GB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD1, supports SD3.0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne Gigabit Ethernet: 1 x RGMII PHY (RTL8211FDI-CG) and RJ45 port connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne 10\/100 Megabit Ethernet: 1 x RMII PHY (RTL8201FI-VC) and RJ45 port connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo High Speed USB: HSUSB0 (Host\/Device) and HSUSB1 (Host)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne Raspberry Pi 40-pin header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArduino UNO compatible extension connectors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne Camera Capture (CMOS sensor) header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne Audio codec (NAU88C22) with microphone input and speaker output\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of UART: header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of RS485: Transceiver and header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of CAN FD: Transceiver and header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFour Key buttons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree user defined LEDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-IoT-MA35D16F90_F.png_837458809.png?v=1779181998\" alt=\"NuMaker-IoT-MA35D16F90_F\"\u003e: \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-IoT-MA35D16F90_B.png_837458809.png?v=1779182004\" alt=\"NuMaker-IoT-MA35D16F90_B\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003el https:\/\/www.nuvoton.com\/products\/iot-solution\/iot-platform\/numaker-iot-ma35d1-a1\/\u003c\/p\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/iot-solution\/iot-platform\/numaker-iot-ma35d1-a1\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA35D1 Series: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d1-high-performance-edge-iiot-series\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35D1 series\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA35D1 Series: \u003ca href=\"https:\/\/www.nuvoton.com\/export\/sites\/nuvoton\/images\/Microprocessors\/NuMaker-IoT-MA35D16F90_F.png\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNuMaker-IoT-MA35D16F90_F\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA35D1 Series: \u003ca href=\"https:\/\/www.nuvoton.com\/export\/sites\/nuvoton\/images\/Microprocessors\/NuMaker-IoT-MA35D16F90_B.png\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNuMaker-IoT-MA35D16F90_B\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43529171828942,"sku":"NK-IMA35D1A1","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/numaker-iot-ma35d1-a1.webp?v=1791260021"},{"product_id":"numaker-hmi-ma35d1-s1","title":"NuMaker-HMI-MA35D1-S1","description":"\u003ch5\u003eMA35D1 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series is a heterogeneous multi-core microprocessor targeted to high-end edge IIoT gateway. It is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speed up to 800 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Based on the high-performance cores, the MA35D1 series facilities the tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D1 supports 16-bit DDR2 and DDR3\/ DDR3L SDRAM. For an easy system design and manufacture, the MA35D1 series also offers LQFP and BGA packages stacked with the DDR2\/DDR3L SDRAM and density up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D1 series is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI) an isolated secure hardware unit, TrustZone, secure boot, tamper-detection, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D1 series provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003cp\u003eFor HMI applications, the MA35D1 series provides a LCD display controller with the resolution up to 1920x1080 at 60 FPS, a 2D graphic engine, a JPEG and a H.264 decoder integrated for better graphical HMI effects and video playback.\u003c\/p\u003e\u003ch5\u003eNuMaker-HMI-MA35D1-S1\u003c\/h5\u003e\u003cp\u003eThe NuMaker-HMI-MA35D1-S1 is an evaluation board for Nuvoton NuMicro MA35D1 series microprocessors, and consists of three parts: a NuMaker-SOM-MA35D16A81 SOM board, a NuMaker-BASE-MA35D1B1 base board and a 7” TFT-LCD daughter board. The SOM board integrates core components to simplify the system design, based on MA35D16A887C (BGA312 package, and stacking a 256 MB DDR), PMIC power solution, a 16 GB eMMC Flash, and two Gigabit Ethernet PHY. The NuMaker-HMI-MA35D1-S1 has rich peripherals such as 2 sets of Gigabit Ethernet, USB2.0 high-speed host and device, 2 sets of CAN FD, and SPI, I²C, UART, RS-485 serial communication ports for users to facilitate the evaluation in HMI and industrial control, home appliances, 2-wheel cluster, medical device, new energy applications, ML (Machine Learning) or your creative applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-HMI-MA35D1-S1 Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoM (NuMaker-SOM-MA35D16A81)\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMA35D16A8A7C \/ BGA312 package, stacking a 256MB DDR\u003c\/li\u003e\n\u003cli\u003ePMIC power solution\u003c\/li\u003e\n\u003cli\u003eeMMC Flash 16 GB\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet PHY x2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaseboard (NuMaker-BASE-MA35D1B1)\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eGigabit Ethernet x2\u003c\/li\u003e\n\u003cli\u003eUSB2.0 HS Host x1, USB2.0 HS Host\/Device x1\u003c\/li\u003e\n\u003cli\u003eCAN FD x2\u003c\/li\u003e\n\u003cli\u003eSD2.0 (Standard SD Slot) x1\u003c\/li\u003e\n\u003cli\u003eUART x2, RS485 x2\u003c\/li\u003e\n\u003cli\u003eADC x8\u003c\/li\u003e\n\u003cli\u003eCamera I\/F x2\u003c\/li\u003e\n\u003cli\u003eAudio codec with Mic, Headset Jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTFT LCD Daughter Board\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e7” TFT-LCD (1024x600) with 4-wire resistive touch\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMake-HMI-MA35D1-S1-1.png?v=1779182035\" alt=\"NuMake-HMI-MA35D1-S1-1\"\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMake-HMI-MA35D1-S1-2.png?v=1779182041\" alt=\"NuMake-HMI-MA35D1-S1-2\"\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMake-HMI-MA35D1-S1-3.png_1118211077.png?v=1779182046\" alt=\"NuMake-HMI-MA35D1-S1-3\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/gui-solution\/gui-platform\/numaker-hmi-ma35d1-s1\/index.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43529171894478,"sku":"NK-HMA35D1S1","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1357.jpg?v=1779182067"},{"product_id":"numaker-hmi-ma35h0-a1","title":"NuMaker-HMI-MA35H0-A1","description":"\u003ch5\u003eMA35H0 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35H0 series is a high-performance microprocessor specifically designed for industrial HMI applications. It is based on dual 64\/32-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores. The high-performance cores run up to 650 MHz and include 32\/32 KB I\/D L1 cache for each core, along with a 512 KB shared L2 cache.\u003c\/p\u003e\u003cp\u003eThe MA35H0 series supports secure booting from four modes, USB, SD\/eMMC, NAND, and SPI Flash (SPI NOR\/SPI NAND). In order to provide easy system design and manufacturing, the MA35H0 series also offers LQFP package stacked with a 128 MB DDR, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35H0 series is a trusted system for industrial HMI applications security requirement. It includes practical security mechanisms such as Arm\u003csup\u003e®\u003c\/sup\u003e TrustZone\u003csup\u003e®\u003c\/sup\u003e technology and secure boot, built-in cryptographic accelerators with AES, SHA, ECC, RSA, SM2\/3\/4, and a TRNG, also Key Store and OTP memory to protect sensitive and high-value data.\u003c\/p\u003e\u003cp\u003eTo obtain better graphical HMI effects, the MA35H0 series provides an LCD Display controller with the resolution up to 1280x800 at 60 fps, a 2D graphic engine, a JPEG and a H.264 decoder for video decoding. Furthermore, the MA35H0 series also provides high-speed connectivity and advanced control interfaces for high-performance HMI applications, such as Megabit Ethernet, high-speed USB host and device, SD3.0\/eMMC, and CAN FD.\u003c\/p\u003e\u003ch5\u003eNuMaker-MA35H0-A1\u003c\/h5\u003e\u003cp\u003eThe NuMaker-HMI-MA35H0-A1 is an evaluation board for Nuvoton NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35H0 series microprocessors, and consists of two parts: a NuMaker- HMI-MA35H04F70 board and a NuMaker-TFT-LCD7 board. The NuMaker-HMI-MA35H0-A1 board integrates core components to simplify the system design, based on MA35H04F764C (LQFP216 package, and stacking a 128 MB DDR), discrete power supply power solution, and one megabit Ethernet PHY. The NuMaker-HMI-MA35H0-A1 has rich peripherals such as 1 set of megabit Ethernet, USB2.0 high-speed host and device, 1 set of SD2.0 in Micro SD slot, 1 set of SD3.0 in SD slot, 1 set of CAN FD, SPI, I²C, UART, and 2 sets of RS-485\/RS-232 serial communication ports for users to facilitate the evaluation in HMI and industrial control, home appliances, 2-wheel cluster, medical device, new energy applications, ML (Machine Learning) or your creative applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-MA35H0-A1 Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNuMaker-HMI-MA35H04F70 Board\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eMain Chip: MA35H04F764C (LQFP216) MCP package with 128 MB DDR SDRAM\u003c\/li\u003e\n\u003cli\u003ePower:\u003c\/li\u003e\n\u003cli\u003e5V Powered by USB type C\u003c\/li\u003e\n\u003cli\u003eBattery header for RTC power\u003c\/li\u003e\n\u003cli\u003eDebug:\u003c\/li\u003e\n\u003cli\u003eUART0 debug port: USB Virtual COM (VCOM) port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) connector\u003c\/li\u003e\n\u003cli\u003eMemory Devices\u003c\/li\u003e\n\u003cli\u003eAn on-board Quad SPI NAND Flash device (512 MB)\u003c\/li\u003e\n\u003cli\u003eAn on-board NAND Flash device (1 GB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD0, supports SD3.0)\u003c\/li\u003e\n\u003cli\u003eStandard-SD memory card (SD1,supports SD3.0)\u003c\/li\u003e\n\u003cli\u003eOne power-on setting DIP-Switch for evaluation booting source selection\u003c\/li\u003e\n\u003cli\u003eOne set of 10\/100 Megabit Ethernet port: One Megabit Ethernet (RMII) PHY device, one transformer and one RJ45 port connector\u003c\/li\u003e\n\u003cli\u003eTwo sets of high-speed USB ports: One Host\/Device port and one Host port\u003c\/li\u003e\n\u003cli\u003eOne audio codec with microphone input and speaker output\u003c\/li\u003e\n\u003cli\u003eTwo sets of RS232\/RS485 transceiver and DB9\/header connector\u003c\/li\u003e\n\u003cli\u003eOne set of CAN FD transceiver and header connector\u003c\/li\u003e\n\u003cli\u003eThree user key buttons\u003c\/li\u003e\n\u003cli\u003eThree user LEDs\u003c\/li\u003e\n\u003cli\u003eOne 3-channel ADC header connector\u003c\/li\u003e\n\u003cli\u003eOne LCM connector to connect with 7’’ 1024x600 LCD daughter board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNuMaker TFT-LCD7 Board\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOne LCD FPC connector to connect with 7’’ 1024x600 TFT LCD panel\u003c\/li\u003e\n\u003cli\u003eOne 4-wire resistive touch FPC connector\u003c\/li\u003e\n\u003cli\u003eOne connector to connect with NuMaker-HMI-MA35H04F70 board\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Nuvoton-NuMaker-HMI-MA35H0-A1-Front.png_672012802.png?v=1779184427\" alt=\"Nuvoton-NuMaker-HMI-MA35H0-A1-Front\" width=\"400\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑1 Front view of NuMaker-HMI-MA35H0-A1 Board\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Nuvoton-NuMaker-HMI-MA35H0-A1-Rear.png_1215552596.png?v=1779184432\" alt=\"Nuvoton-NuMaker-HMI-MA35H0-A1-Rear\" width=\"400\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑2 Rear View of NuMaker-HMI-MA35H0-A1\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Nuvoton-NuMaker-HMI-MA35H0-A1-Demo.png?v=1779184438\" alt=\"Nuvoton-NuMaker-HMI-MA35H0-A1-Demo\" width=\"396\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑3 Picture of demo menu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eNuvoton Official Forum\u003c\/h5\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuForum_Logo.png_1246928948.png?v=1779182773\" alt=\"NuForum_Logo\"\u003e\u003c\/p\u003e\u003cp\u003e*Ordering Number: NK-HMA35H0A1\u003c\/p\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/gui-solution\/gui-platform\/numaker-hmi-ma35h0-a1\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNuMaker-MA35H0-A1: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35h0-industrial-hmi-series\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35H0\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNuvoton Official Forum: \u003ca href=\"http:\/\/forum.nuvoton.com\/viewforum.php?f=31\u0026amp;sid=7e81cf60be816df4f09cd6cbb3cb1a14\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNuForum_Logo\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43529260138702,"sku":"NK-HMA35H0A1","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1522.jpg?v=1779184454"},{"product_id":"numaker-iot-ma35d0-a1","title":"NuMaker-IoT-MA35D0-A1","description":"\u003ch5\u003eMA35D0 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D0 series is a high-performance microprocessor designed for industrial edge device applications. It features dual 64\/32-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores, running at speeds of up to 650 MHz. Each core includes a 32\/32 KB I\/D L1 cache, and there is a 512 KB shared L2 cache.\u003c\/p\u003e\u003cp\u003eThe MA35D0 series comes with a built-in 128 KB IBR (Internal Boot ROM) and supports secure booting from four modes: USB, SD\/eMMC, NAND, and SPI Flash (SPI NOR\/SPI NAND). To facilitate system design and manufacturing, the MA35D0 series offers an LQFP package stacked with DDR SDRAM, with capacities of up to 256 MB. This integration significantly reduces PCB layers, size, and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eFor industrial applications requiring high security, the MA35D0 series provides practical security mechanisms such as Arm\u003csup\u003e®\u003c\/sup\u003e TrustZone\u003csup\u003e®\u003c\/sup\u003e technology and secure boot. It also includes built-in cryptographic accelerators for AES, SHA, ECC, RSA, SM2\/3\/4, and a TRNG, as well as Key Store and OTP memory to protect sensitive and high-value data.\u003c\/p\u003e\u003cp\u003eIn addition to security features, the MA35D0 series offers high-speed connectivity and advanced control interfaces suitable for edge device applications. These include Megabit Ethernet, high-speed USB host and device, SD3.0\/eMMC, and CAN FD. The series also features an LCD Display controller supporting resolutions up to 1280 x 800 at 60 fps, a 2D graphic engine, and JPEG image decoding capabilities.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D0-A1\u003c\/h5\u003e\u003cp\u003eThe NuMaker-IoT-MA35D0-A1 is an evaluation board (EVB) for Nuvoton NuMicro MA35D0 series microprocessors. The EVB has rich peripherals such as 2 sets of 10\/100 megabit Ethernet, USB2.0 high-speed host and device, 1 set of SD2.0 in Micro SD slot, 1 set of SD3.0 in SD slot, 3 sets of CAN FD, SPI, I²C, UART, and 2 sets of RS-485\/RS-232 serial communication ports for users to facilitate the evaluation in edge device application, such as industrial control, home appliances, new energy applications or your creative applications.\u003c\/p\u003e\u003ch5\u003eThe EVB is pre-loaded with remote control example, included the features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eAccess the NuMaker-IoT-MA35D0-A1 system status via web browser\u003c\/li\u003e\n\u003cli\u003eexchange of EVBs information on the same network\u003c\/li\u003e\n\u003cli\u003eCould establish the connection with web server by Ethernet or Wi-Fi\/4G\u003c\/li\u003e\n\u003cli\u003eWeb server application integration of Node.js\/HTML5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNuMaker-IoT-MA35D0-A1 Features\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eNuMaker-IoT-MA35D03F80 Board\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMain Chip: MA35D03F864C (LQFP216) MCP package with DDR3L (256 MB), which can run up to 650 MHz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e5V Powered by USB Type-C\u003c\/li\u003e\n\u003cli\u003eBattery header for RTC power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebug:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUART0 debug port: USB Virtual COM (VCOM) port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Devices\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eAn on-board Quad SPI NAND Flash device (512 MB)\u003c\/li\u003e\n\u003cli\u003eAn on-board NAND Flash device (1 GB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD0, supporting SD2.0)\u003c\/li\u003e\n\u003cli\u003eStandard-SD memory card (SD1, supporting SD3.0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne power-on setting DIP-Switch for evaluation booting source selection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sets of 10\/100 Megabit Ethernet port: Two Megabit Ethernet (RMII) PHY devices, two transformers and two RJ45 port connectors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sets of high-speed USB ports: One Host\/Device port and one Host port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne audio codec with microphone input and speaker output\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sets of RS232\/RS485 transceiver and DB9\/header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree sets of CAN FD transceiver and header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree user key buttons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree user LEDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne 8-channel ADC header connector\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-IoT-MA35D0-A1.png_2137861408.png?v=1779185010\" alt=\"NuMaker-IoT-MA35D0-A1\"\u003e\u003c\/li\u003e\n\u003cli\u003eFront view of NuMaker-IoT-MA35D0-A1 Board\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/IoT-Function-Demonstration-Architecture.png?v=1779185015\" alt=\"IoT Function Demonstration Architecture\"\u003e\u003c\/li\u003e\n\u003cli\u003eIoT Function Demonstration Architecture\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Web-Control-Page.png?v=1779185021\" alt=\"Web Control Page\"\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/iot-solution\/iot-platform\/numaker-iot-ma35d0-a1\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43529261187278,"sku":"NK-IMA35D0A1","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1573.jpg?v=1779185036"},{"product_id":"numaker-hmi-ma35h0-a2","title":"NuMaker-HMI-MA35H0-A2","description":"\u003ch5\u003eMA35H0 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35H0 series is a high-performance microprocessor specifically designed for industrial HMI applications. It is based on dual 64\/32-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores. The high-performance cores run up to 650 MHz and include 32\/32 KB I\/D L1 cache for each core, along with a 512 KB shared L2 cache.\u003c\/p\u003e\u003cp\u003eThe MA35H0 series supports secure booting from four modes, USB, SD\/eMMC, NAND, and SPI Flash (SPI NOR\/SPI NAND). In order to provide easy system design and manufacturing, the MA35H0 series also offers LQFP package stacked with a 128 MB DDR, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35H0 series is a trusted system for industrial HMI applications security requirement. It includes practical security mechanisms such as Arm\u003csup\u003e®\u003c\/sup\u003e TrustZone\u003csup\u003e®\u003c\/sup\u003e technology and secure boot, built-in cryptographic accelerators with AES, SHA, ECC, RSA, SM2\/3\/4, and a TRNG, also Key Store and OTP memory to protect sensitive and high-value data.\u003c\/p\u003e\u003cp\u003eTo obtain better graphical HMI effects, the MA35H0 series provides an LCD Display controller with the resolution up to 1280x800 at 60 fps, a 2D graphic engine, a JPEG and a H.264 decoder for video decoding. Furthermore, the MA35H0 series also provides high-speed connectivity and advanced control interfaces for high-performance HMI applications, such as Megabit Ethernet, high-speed USB host and device, SD3.0\/eMMC, and CAN FD.\u003c\/p\u003e\u003ch5\u003eNuMaker-MA35H0-A2\u003c\/h5\u003e\u003cp\u003eThe NuMaker-HMI-MA35H0-A2 is an evaluation board for Nuvoton NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35H0 series microprocessors, and consists of two parts: a NuMaker- HMI-MA35H04F70 board and a NuMaker-TFT-LCD7 board with a Capacitive Touch Panel. The NuMaker-HMI-MA35H0-A2 board integrates core components to simplify the system design, based on MA35H04F764C (LQFP216 package, and stacking a 128 MB DDR), discrete power supply power solution, and one megabit Ethernet PHY. The NuMaker-HMI-MA35H0-A2 has rich peripherals such as 1 set of megabit Ethernet, USB2.0 high-speed host and device, 1 set of SD2.0 in Micro SD slot, 1 set of SD3.0 in SD slot, 1 set of CAN FD, SPI, I²C, UART, and 2 sets of RS-485\/RS-232 serial communication ports for users to facilitate the evaluation in HMI and industrial control, home appliances, 2-wheel cluster, medical device, new energy applications, ML (Machine Learning) or your creative applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-MA35H0-A2 Features\u003c\/h5\u003e\u003cp\u003eNuMaker-HMI-MA35H04F70 Board\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMain Chip: MA35H04F764C (LQFP216) MCP package with 128 MB DDR SDRAM\u003c\/li\u003e\n\u003cli\u003ePower:\u003c\/li\u003e\n\u003cli\u003e5V Powered by USB type C\u003c\/li\u003e\n\u003cli\u003eBattery header for RTC power\u003c\/li\u003e\n\u003cli\u003eDebug:\u003c\/li\u003e\n\u003cli\u003eUART0 debug port: USB Virtual COM (VCOM) port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) connector\u003c\/li\u003e\n\u003cli\u003eMemory Devices\u003c\/li\u003e\n\u003cli\u003eAn on-board Quad SPI NAND Flash device (512 MB)\u003c\/li\u003e\n\u003cli\u003eAn on-board NAND Flash device (1 GB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD0, supports SD2.0)\u003c\/li\u003e\n\u003cli\u003eStandard-SD memory card (SD1,supports SD3.0)\u003c\/li\u003e\n\u003cli\u003eOne power-on setting DIP-Switch for evaluation booting source selection\u003c\/li\u003e\n\u003cli\u003eOne set of 10\/100 Megabit Ethernet port: One Megabit Ethernet (RMII) PHY device, one transformer and one RJ45 port connector\u003c\/li\u003e\n\u003cli\u003eTwo sets of high-speed USB ports: One Host\/Device port and one Host port\u003c\/li\u003e\n\u003cli\u003eOne audio codec with microphone input and speaker output\u003c\/li\u003e\n\u003cli\u003eTwo sets of RS232\/RS485 transceiver and DB9\/header connector\u003c\/li\u003e\n\u003cli\u003eOne set of CAN FD transceiver and header connector\u003c\/li\u003e\n\u003cli\u003eThree user key buttons\u003c\/li\u003e\n\u003cli\u003eThree user LEDs\u003c\/li\u003e\n\u003cli\u003eOne 3-channel ADC header connector\u003c\/li\u003e\n\u003cli\u003eOne LCM connector to connect with 7’’ 1024x600 LCD daughter board\u003c\/li\u003e\n\u003cli\u003eNuMaker TFT-LCD7 Board\u003c\/li\u003e\n\u003cli\u003eOne LCD FPC connector for a 7\" 1024x600 TFT LCD with capacitive touch\u003c\/li\u003e\n\u003cli\u003eOne capacitive touch FPC connector\u003c\/li\u003e\n\u003cli\u003eOne connector to connect with NuMaker-HMI-MA35H04F70 board\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-HMI-MA35H0-A2.png?v=1779185226\" alt=\"NuMaker-HMI-MA35H0-A2\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑1 Front view of NuMaker-HMI-MA35H0-A2 Board\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-HMI-MA35H0-A2-Rear.png_37960063.png?v=1779185231\" alt=\"NuMaker-HMI-MA35H0-A2-Rear\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑2 Rear View of NuMaker-HMI-MA35H0-A2\u003c\/li\u003e\n\u003cli\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Nuvoton-NuMaker-HMI-MA35H0-A1-Demo.png?v=1779184438\" alt=\"Nuvoton-NuMaker-HMI-MA35H0-A1-Demo\"\u003e\u003c\/li\u003e\n\u003cli\u003eFigure 1‑3 Picture of demo menu\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eNuvoton Official Forum\u003c\/h5\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuForum_Logo.png_1246928948.png?v=1779182773\" alt=\"NuForum_Logo\"\u003e\u003c\/p\u003e\u003cp\u003e*Ordering Number: NK-HMA35H0A2\u003c\/p\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/gui-solution\/gui-platform\/numaker-hmi-ma35h0-a2\/index.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNuMaker-MA35H0-A2: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35h0-industrial-hmi-series\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35H0\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNuvoton Official Forum: \u003ca href=\"http:\/\/forum.nuvoton.com\/viewforum.php?f=31\u0026amp;sid=7e81cf60be816df4f09cd6cbb3cb1a14\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNuForum_Logo\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43529261547726,"sku":"NK-HMA35H0A2","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1596.jpg?v=1779185246"},{"product_id":"numaker-hmi-ma35d1-a1","title":"NuMaker-HMI-MA35D1-A1","description":"\u003cp\u003eMA35D1 Series\u003c\/p\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series is a heterogeneous multi-core microprocessor targeted to high-end edge IIoT gateway. It is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speed up to 800 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Based on the high-performance cores, the MA35D1 series facilitates Tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D1 supports 16-bit DDR2 and DDR3\/ DDR3L SDRAM. For an easy system design and manufacture, the MA35D1 series also offers LQFP and BGA packages stacked with the DDR2\/DDR3L SDRAM and density up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D1 series is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI), an isolated secure hardware unit, TrustZone\u003csup\u003e®\u003c\/sup\u003e, secure boot, tamper-detection, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D1 series integrates PDMA, which can directly access system memory without CPU intervention to enhance system performance. At the same time, it provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003cp\u003eFor HMI applications, the MA35D1 series provides a LCD display controller with the resolution up to 1920x1080 at 60 FPS, a 2D graphic engine, a JPEG and a H.264 decoder integrated for better graphical HMI effects and video playback.\u003c\/p\u003e\u003cp\u003eNuMaker-HMI-MA35D1-A1\u003c\/p\u003e\u003cp\u003eThe NuMaker-HMI-MA35D1-A1 is an evaluation board for Nuvoton NuMicro MA35D1 series microprocessors, and consists of two parts: a NuMaker-HMI-MA35D16AJ2 main board and a 7” TFT-LCD daughter board. The main board integrates core components to simplify the system design, based on MA35D16AJ87C (BGA312 package, and stacking a 512 MB DDR), PMIC power solution, a 16 GB eMMC, and two Gigabit Ethernet. The NuMaker-HMI-MA35D1-A1 has rich peripherals such as 2 sets of Gigabit Ethernet, USB2.0 high-speed host and device, 2 sets of CAN-FD, and SPI, I²C, UART, RS-485 serial communication ports for users to facilitate the evaluation in HMI and industrial control, home appliances, 2-wheel cluster, medical device, new energy applications, Machine Learning (ML) or your creative applications.\u003c\/p\u003e\u003cp\u003eNuMaker-HMI-MA35D1-A1 Features\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMain Board (NuMaker-HMI-MA35D16AJ2)\u003c\/li\u003e\n\u003cli\u003eMA35D16AJ87C\/ BGA312 package, stacking a 512MB DDR\u003c\/li\u003e\n\u003cli\u003ePMIC power solution\u003c\/li\u003e\n\u003cli\u003eeMMC 16 GB\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet x2\u003c\/li\u003e\n\u003cli\u003eUSB2.0 HS Host x1, USB2.0 HS Host\/Device x1\u003c\/li\u003e\n\u003cli\u003eCAN-FD x2\u003c\/li\u003e\n\u003cli\u003eSD2.0 (Standard SD Slot) x1\u003c\/li\u003e\n\u003cli\u003eUART x2, RS485 x2\u003c\/li\u003e\n\u003cli\u003eADC x8\u003c\/li\u003e\n\u003cli\u003eCamera I\/F x2\u003c\/li\u003e\n\u003cli\u003eAudio codec with Mic, Headset Jack\u003c\/li\u003e\n\u003cli\u003eTFT LCD Daughter Board\u003c\/li\u003e\n\u003cli\u003e7” TFT-LCD (1024x600) with 4-wire resistive touch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43609553273038,"sku":"NK-HMA35D1A1","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/numaker-hmi-ma35d1-a1.webp?v=1791259985"},{"product_id":"ma35d16aj87c","title":"MA35D16AJ87C","description":"\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series is a heterogeneous multi-core microprocessor targeted to high-end edge IIoT gateway. It is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speed up to 800 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Based on the high-performance cores, the MA35D1 series facilities the tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D1 supports 16-bit DDR2 and DDR3\/DDR3L SDRAM. For an easy system design and manufacture, the MA35D1 series also offers LQFP and BGA packages stacked with the DDR2\/DDR3L SDRAM and density up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D1 series is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI) an isolated secure hardware unit, TrustZone, secure boot, tamper-detection, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D1 series provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO 3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003cp\u003eFor HMI applications, the MA35D1 series provides a LCD display controller with the resolution up to 1920x1080 at 60 FPS, a 2D graphic engine, a JPEG and a H.264 decoder integrated for better graphical HMI effects and video playback.\u003c\/p\u003e\u003ch5\u003eKey Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore Sub-system\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eDual Cortex-A35 core running up to 800 MHz\u003c\/li\u003e\n\u003cli\u003eCortex-M4 processor core running up to 180 MHz\u003c\/li\u003e\n\u003cli\u003eReal-Time Clock (RTC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Sub-system\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOn-chip SRAM 384 KB (Cortex-A35 256 KB + Cortex-M4 128 KB)\u003c\/li\u003e\n\u003cli\u003eMulti-Chip Package (MCP) DDR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity Sub-system\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSupport TrustZone\u003c\/li\u003e\n\u003cli\u003eSupport Secure Boot\u003c\/li\u003e\n\u003cli\u003eTrusted Secure Island (TSI)\u003c\/li\u003e\n\u003cli\u003eRun-Time Integrity Checker (RTIC)\u003c\/li\u003e\n\u003cli\u003eCryptographic\u003c\/li\u003e\n\u003cli\u003eAdvanced Encryption Standard (AES)\u003c\/li\u003e\n\u003cli\u003eSecure Hash Algorithm (SHA)\u003c\/li\u003e\n\u003cli\u003eElliptic Curve Cryptography (ECC)\u003c\/li\u003e\n\u003cli\u003eRivest、Shamir and Adleman Cryptography (RSA)\u003c\/li\u003e\n\u003cli\u003eSM 2\/3\/4\u003c\/li\u003e\n\u003cli\u003eTrue Random Number Generator (TRNG)\u003c\/li\u003e\n\u003cli\u003eKeyStore\u003c\/li\u003e\n\u003cli\u003eOne-Time-Program (OTP) Memory\u003c\/li\u003e\n\u003cli\u003eTamper Detection Pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay and Video Sub-system\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eTFT-LCD Display Interface in RGB 24-bit\u003c\/li\u003e\n\u003cli\u003eDisplay Resolution up to 1080P @ 60 FPS\u003c\/li\u003e\n\u003cli\u003e2D Graphic Engine (GFX)\u003c\/li\u003e\n\u003cli\u003eH.264 Video Decoder\u003c\/li\u003e\n\u003cli\u003eJPEG Image Decoder\u003c\/li\u003e\n\u003cli\u003eCMOS Sensor Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity and I\/O Sub-system\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e-40 ~ 85 ℃ (Industry Grade)\u003c\/li\u003e\n\u003cli\u003ePeripheral DMA (PDMA)\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Connectivity\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet MAC (GMAC)\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 High Speed Host and Device\u003c\/li\u003e\n\u003cli\u003eSecure Digital Host Controller (SDHC)\u003c\/li\u003e\n\u003cli\u003eSerial Connectivity\u003c\/li\u003e\n\u003cli\u003eCAN FD\u003c\/li\u003e\n\u003cli\u003eQuad SPI\u003c\/li\u003e\n\u003cli\u003eI²S\u003c\/li\u003e\n\u003cli\u003eLow-power UART\u003c\/li\u003e\n\u003cli\u003eI²C\u003c\/li\u003e\n\u003cli\u003eExternal Memory Interface\u003c\/li\u003e\n\u003cli\u003eExternal Bus Interface (EBI)\u003c\/li\u003e\n\u003cli\u003eSecure Digital Host Controller (SDHC)\u003c\/li\u003e\n\u003cli\u003eNAND Flash Controller\u003c\/li\u003e\n\u003cli\u003eControl Interface\u003c\/li\u003e\n\u003cli\u003eEnhanced PWM (EPWM)\u003c\/li\u003e\n\u003cli\u003e32-bit Timer PWM\u003c\/li\u003e\n\u003cli\u003eQuadrature Encoder Interface (QEI)\u003c\/li\u003e\n\u003cli\u003eEnhanced Capture (ECAP)\u003c\/li\u003e\n\u003cli\u003eHuman Machine Interface\u003c\/li\u003e\n\u003cli\u003eKeyPad Interface (KPI)\u003c\/li\u003e\n\u003cli\u003e4\/5-Wire Touch\u003c\/li\u003e\n\u003cli\u003eAnalog Peripherals\u003c\/li\u003e\n\u003cli\u003eEnhanced Analog-to-Digital Converter (EADC)\u003c\/li\u003e\n\u003cli\u003eAnalog-to-Digital Converter (ADC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d1-high-performance-edge-iiot-series\/ma35d16aj87c\/#\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Tray","offer_id":43609556779214,"sku":"MA35D16AJ87C","price":29.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1744_2da13d8f-bf85-4e32-9b22-da778b69ff9c.png?v=1784109026"},{"product_id":"nk-ima35d1a3","title":"NuMaker-IoT-MA35D1-A3","description":"\u003ch5\u003eMA35D1 Series\u003c\/h5\u003e\u003cp\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series is a heterogeneous multi-core microprocessor targeted to high-end edge IIoT gateway. It is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speed up to 800 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Based on the high-performance cores, the MA35D1 series facilities the tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D1 supports 16-bit DDR2 and DDR3\/ DDR3L SDRAM. For an easy system design and manufacture, the MA35D1 series also offers LQFP and BGA packages stacked with the DDR2\/DDR3L SDRAM and density up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D1 series is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI) an isolated secure hardware unit, TrustZone\u003csup\u003e®\u003c\/sup\u003e, secure boot, tamper-detection, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D1 series provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003cp\u003eFor HMI applications, the MA35D1 series provides a LCD display controller with the resolution up to 1920x1080 at 60 FPS, a 2D graphic engine, a JPEG and a H.264 decoder integrated for better graphical HMI effects and video playback.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D1-A3 EVB\u003c\/h5\u003e\u003cp\u003eThe NuMaker-IoT-MA35D1-A3 evaluation board provides the Ethernet and connectivity features of Nuvoton NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D1 series microprocessors (MPUs), based on MA35D16FJ87C (LQFP-EP 216- Pin package, and stacking a 512 MB DDR). The NuMaker-IoT-MA35D1-A3 includes rich peripherals such as one set of Gigabit Ethernet, one set of Megabit Ethernet, high-speed USB2.0 Host and device, one set of SD2.0 in Micro SD slot, four sets of CAN FD, one RS-485 and one UART serial communication ports. Furthermore, the NuMaker-IoT-MA35D1-A3 provides discrete power supply to be the reference design. It also provides compatible headers with Raspberry Pi and Arduino UNO for minimizing effort in connecting popular sensors and modules to the system. Based on these features, it helps user to facilitate the evaluation in IIoT Edge Gateway, Smart Building, Smart Agriculture, T-Box, 4G\/5G Base Station, or your creative applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT--MA35D1-A3 Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMain Chip: MA35D16FJ87C (LQFP216) MCP package with DDR3L (512 MB), which can run up to 800 MHz\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUSB Type-C 5V\/2A Power Input Receptacle\u003c\/li\u003e\n\u003cli\u003eBattery header for RTC power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebug:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUART0 debug port: USB Virtual COM (VCOM) port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Devices\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eAn on-board Quad SPI NAND Flash device (512 MB)\u003c\/li\u003e\n\u003cli\u003eAn on-board NAND Flash device (1 GB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD1, supports SD3.0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne power-on setting DIP-Switch for evaluation booting source selection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of Gigabit Ethernet port: One Gigabit Ethernet (RGMII) PHY device, transformer and RJ45 port connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of Megabit Ethernet port: One Megabit Ethernet (RMII) PHY device, transformer and RJ45 port connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sets of high speed USB ports: One Host\/Device port and one Host port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne Raspberry Pi 40-pin header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eArduino UNO compatible extension connectors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne camera capture (CMOS sensor) header connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne audio codec with microphone input and speaker output\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne UART header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne set of RS485 transceiver and connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFour sets of CAN FD transceivers and connectors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFour user key buttons\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThree user LEDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/NuMaker-IoT-MA35D1-A3-Board.png?v=1784109840\" alt=\"NuMaker-IoT-MA35D1-A3 Board\" height=\"268\"\u003e\u003c\/p\u003e\u003cp\u003eFigure 1 1 Front view of NuMaker-IoT-MA35D1-A3 Board\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/IoT-Function-Demonstration-Architecture_8902073e-29f4-46e9-8b4c-2baaa1fb2815.png?v=1784109846\" alt=\"IoT Function Demonstration Architecture\" height=\"173\"\u003e\u003c\/p\u003e\u003cp\u003eFigure 1‑2 IoT Function Demonstration Architecture\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Web-Control-Page.png?v=1779185021\" alt=\"Web Control Page\" height=\"186\"\u003e\u003c\/p\u003e\u003cp\u003eFigure 1‑3 Web Control Page\u003c\/p\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eFor more details, please visit Nuvoton Official Website: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/iot-solution\/iot-platform\/numaker-iot-ma35d1-a3\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGO\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMA35D1 Series: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d1-high-performance-edge-iiot-series\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35D1 series\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":43609573163214,"sku":"NK-IMA35D1A3","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/1835_a4367b85-7016-44ca-b1f1-386b101f901f.png?v=1784109874"},{"product_id":"numaker-iot-ma35d0-a2","title":"NuMaker-IoT-MA35D0-A2","description":"\u003cp\u003e\u003cstrong\u003eThe NuMicro\u003csup\u003e®\u003c\/sup\u003e\u003c\/strong\u003e \u003cstrong\u003eMA35D05K series\u003c\/strong\u003e \u003cstrong\u003eis a high-performance microprocessor designed for industrial edge device applications.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is based on dual 64-bit Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 cores with speeds up to 650 MHz, and one 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex\u003csup\u003e®\u003c\/sup\u003e-M4 core. Each Cortex\u003csup\u003e®\u003c\/sup\u003e-A35 includes a 32\/32 KB I\/D L1 cache, and there is a 512 KB shared L2 cache.\u003c\/p\u003e\u003cp\u003eThe MA35D0 series comes with a built-in 128 KB IBR (Internal Boot ROM) and supports secure booting from four modes: USB, SD\/eMMC, NAND, and SPI Flash Memory (SPI NOR\/SPI NAND). To facilitate system design and manufacturing, the MA35D0 series offers an LQFP package stacked with DDR SDRAM, with capacities of up to 512 MB. This integration significantly reduces PCB layers, size, and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eFor industrial applications requiring high security, the MA35D0 series provides practical security mechanisms such as Arm\u003csup\u003e®\u003c\/sup\u003e TrustZone\u003csup\u003e®\u003c\/sup\u003e technology and secure boot. It also includes built-in cryptographic accelerators for AES, SHA, ECC, RSA, SM2 \/ 3 \/ 4, and a TRNG, as well as Key Store and OTP memory to protect sensitive and high-value data.\u003c\/p\u003e\u003cp\u003eIn addition to security features, the MA35D0 series offers high-speed connectivity and advanced control interfaces suitable for edge device applications. These include Megabit \/ Gigabit Ethernet, high-speed USB host and device, SD3.0 \/ eMMC, and CAN FD.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D0-A2 EVB (Chili Pro)\u003c\/h5\u003e\u003cp\u003eThe NuMaker-IoT-MA35D0-A2 evaluation board based on the NuMicro\u003csup\u003e®\u003c\/sup\u003e MA35D05KI67C microprocessor has rich peripherals such as one set of Gigabit Ethernet, USB2.0 high-speed host and device, one set of SD3.0 in SD slot, one user-defined key button, one user-defined LED and two GPIO extension connectors that can implement UART, CAN FD, SPI, I²C, I²S and ADC functions for users to facilitate the evaluation in edge device application, such as industrial control, home appliances, new energy applications, or your creative applications.\u003c\/p\u003e\u003cp\u003eThe MA35D05Kx67C (x = H, I or J) is a high-performance microprocessor targeted to industrial edge device applications. It is based on dual 64-bit Arm Cortex-A35 cores with speeds up to 650 MHz and 32\/32 KB I\/D L1 cache for each core, a 512 KB shared L2 cache, and an additional 180 MHz Arm\u003csup\u003e®\u003c\/sup\u003e Cortex-M4 core acts as a real-time processor. Based on these high-performance cores, the MA35D05Kx67C facilities tiny AI\/ML for edge computing.\u003c\/p\u003e\u003cp\u003eThe MA35D05Kx67C has a built-in 128 KB IBR (Internal Boot ROM) and supports secure booting from three modes, USB, SD\/eMMC and SPI Flash (SPI NOR\/SPI NAND). To provide easy system design and manufacture, the MA35D05Kx67C also offers LQFP128 with EPAD package stacked with a DDR3L SDRAM and the size up to 512 MB, which significantly reduces PCB layer, size and electromagnetic interference (EMI).\u003c\/p\u003e\u003cp\u003eThe MA35D05Kx67C is a trusted system for IoT products' security requirements. It includes several advanced security mechanisms such as Nuvoton Trusted Secure Island (TSI), an isolated secure hardware unit, TrustZone, secure boot, built-in cryptographic accelerators, and a TRNG, as well as Key Store and OTP memory. All the security operations are performed in the TSI to protect sensitive and high-value data. The features also satisfy customers in IEC 62443 certification requirements.\u003c\/p\u003e\u003cp\u003eFor high-end edge IIoT gateway requirements, the MA35D05Kx67C provides multiple advanced and high-speed connection interfaces, such as Gigabit Ethernet, SDIO3.0, USB 2.0 HS, and CAN FD, for edge gateway and new energy applications.\u003c\/p\u003e\u003ch5\u003eNuMaker-IoT-MA35D0-A2 (Chili Pro) Features\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain Chip:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eMA35D05KI67C (LQFP 128) MCP package with DDR (256MB), which can run up to 650 MHz\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUSB Type-C 5V \/ 2A Power Input Receptacle\u003c\/li\u003e\n\u003cli\u003ePMIC DA9062-3A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDebug:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eUART0 debug port\u003c\/li\u003e\n\u003cli\u003eDebug port: SWJ (JTAG + SWD) header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory Devices\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eAn on-board Quad SPI NAND Flash device (256 MB)\u003c\/li\u003e\n\u003cli\u003eMicroSD memory card (SD1, supporting SD3.0)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne power-on setting DIP-Switch for evaluation booting source selection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne set of Gigabit Ethernet port:\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eOne Gigabit Ethernet (RGMII) PHY device and one RJ45 port connector with 1G transformer\u003c\/li\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo sets of high-speed USB ports: One Host\/Device port and one Host port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo GPIO extension connectors that include the following default peripherals:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eSWJ\u003c\/li\u003e\n\u003cli\u003eUART 4-bit x 1\u003c\/li\u003e\n\u003cli\u003eUART 2-bit x 5\u003c\/li\u003e\n\u003cli\u003eCAN FD x 4\u003c\/li\u003e\n\u003cli\u003eSPI x 1\u003c\/li\u003e\n\u003cli\u003eI²C x 2\u003c\/li\u003e\n\u003cli\u003eI²S x 1\u003c\/li\u003e\n\u003cli\u003eADC x 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne user key button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOne user LED\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch5\u003eResources\u003c\/h5\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Front-view-of-NuMaker-IoT-MA35D0-A2.png?v=1790573062\" alt=\"\"\u003e\u003c\/p\u003e\u003cp\u003eFront view of NuMaker-IoT-MA35D0-A2 (Chili Pro) Board\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Back-view-of-NuMaker-IoT-MA35D0-A2.png?v=1790573066\" alt=\"\" width=\"435\" height=\"246\"\u003e\u003c\/p\u003e\u003cp\u003eBack view of NuMaker-IoT-MA35D0-A2 (Chili Pro) Board\u003c\/p\u003e\u003ch5\u003eTechnical Documents\u003c\/h5\u003e\u003cul\u003e\n\u003cli\u003eMA35D05K Series: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d0-industrial-edge-device-series\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35D05K series\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNuMaker-IoT-MA35D0-A2 EVB (Chili Pro): \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d0-industrial-edge-device-series\/ma35d05ki67c\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMA35D05KI67C\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eResources: \u003ca href=\"https:\/\/www.nuvoton.com\/products\/microprocessors\/arm-cortex-a35-mpus\/ma35d0-industrial-edge-device-series\/design-resource\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDesign Resources\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nuvoton Direct","offers":[{"title":"Default Title","offer_id":48403341803726,"sku":"NK-IMA35D0A2","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0664\/0749\/7934\/files\/Nuvoton-NuMaker-IoT-MA35D05KI1_V1.0_ChiliPro_F.webp?v=1790572826"}],"url":"https:\/\/direct.nuvoton.com\/collections\/arm-cortex-a35-mpus.oembed","provider":"Nuvoton Direct","version":"1.0","type":"link"}